Service Hints
C1 CRUISE CONTROL ACTUATOR1-3: Approx. 2 K Ohms
5-4: Approx. 38 Ohms
C12 CRUISE CONTROL SW [COMB. SW]
5-3: Continuity with the MAIN SW ON
4-3: Approx. 418 Ohms with the CANCEL SW ON
Approx. 198 Ohms with the SET/COAST SW ON
Approx. 68 Ohms with the RESUME/ACCEL SW ON
C15 CRUISE CONTROL ECU
14-GROUND: Approx. 12 Volts with the ignition SW at ON position
15-GROUND: Always approx. 12 Volts
20-GROUND: 4 pulses with 1 rotation of the rotor shaft
18-GROUND: Approx. 418 Ohms with the CANCEL SW ON in the control SW
Approx. 198 Ohms with the SET/COAST SW ON in the control SW
Approx. 68 Ohms with the RESUME/ACCEL SW ON in the control SW
13-GROUND: Always continuity