Blower Motor: Testing and Inspection

1. REMOVE LOWER FINISH PANEL

2. REMOVE BLOWER MOTOR
a. Disconnect the connector.
b. Remove the 3 screws and motor.




3. INSPECT FRONT BLOWER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, then check that the motor operations smoothly.
If operation is not as specified, replace the blower motor.

4. INSTALL BLOWER MOTOR
a. Install the motor and 3 screws.
b. Connect the connector.

5. INSTALL LOWER FINISH PANEL