Front

REMOVAL
1. Remove both stabilizer links.




a. Remove the 2 nuts and stabilizer bar link.

HINT: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.

Torque: 44 Nm (33 ft. lbs.)
b. Employ the same manner described above to the other side.





2. Remove brackets and bushings.
a. Remove the four bolts, two brackets and two bushings.
Torque: 19 Nm (14 ft. lbs.).
b. Remove the stabilizer bar from the left hand side.

INSTALLATION
Installation is in the reverse order of removal.