Front Heater Unit

DISASSEMBLY

1. Auto A/C models:
REMOVE AIR MIX SERVOMOTOR
a. Remove the water valve control cable.
b. Disconnect the connector.
c. Remove the 3 screws and servomotor.

2. Auto A/C models:
REMOVE AIR OUTLET SERVOMOTOR
Remove the 3 screws and servomotor.

3. Auto A/C models:
REMOVE ENGINE COOLANT TEMPERATURE SENSOR
After pulling off the clamp, pull out the sensor.




4. REMOVE HEATER RADIATOR
a. Remove the 3 screws and 2 plates and clamp.
b. Pull out the heater radiator.
c. Remove the 2 screws and 2 clips, then disconnect the heater radiator pipes.

5. REMOVE AIR VENT DUCT
Remove the 2 screws and duct.

REASSEMBLY
Reassembly is in the reverse order of disassembly.