Ignition Coil: Testing and Inspection
ON-VEHICLE INSPECTIONINSPECT IGNITION COIL
a. Disconnect the high-tension cords from the ignition coil.
b. Disconnect the ignition coil connectors.
c. Using an ohmmeter, measure the secondary coil resistance between the positive (+) and high-tension terminals.
Secondary coil resistance:
- Cold: 9.7-16.7 k Ohm
- Hot: 12.4-19.6 k Ohm
If the resistance is not as specified, replace the ignition coil.
d. Connect ignition coil connectors.
e. Connect the high-tension cords from the ignition coils.