Auto Registration Closure

This function allows the user to close Auto Registration Mode when less than three keys have been registered.

NOTE:
When a New ECU is installed, it is in the Auto Registration Mode. This mode allows the Transponder Keys to automatically register as they are Inserted into the Ignition Cylinder. See the Repair Manual for further details.

CAUTION:
This function requires the use of one Registered Master Key. The use of a Sub Key will NOT complete Auto Registration Closure. The use of a non-transponder key during this function may damage the ECU.





1. From the "KEY CODE UTILITY" menu (Screen A), select [3: AUTO REG CLOSURE].





2. Confirm the instruction on Screen B and press the (ENTER) key.





3. At "AUTO REGIST CLOSURE" (Screen C) the Auto Registration Closure Information will be displayed. Press the (ENTER) key to finish.