Keyless Entry Receiver: Service and Repair

REPLACE DOOR CONTROL RECEIVER AND TRANSMITTER
a. Select the operation mode to perform from the following operation modes.
- Add mode
- Rewrite mode
- Confirmation mode

HINT:
- The rewrite mode is used to erase all previously registered codes and register only new recognition codes.
- The prohibition mode is used to erase all registered code and cancels the wireless door lock function. Use this mode when the transmitter is lost.
- The confirmation mode is for confirming how many recognition codes are already registered before you register additional recognition codes.

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

b. Follow the chart to register the transmitter recognition code at the wireless door lock control receiver.

HINT:
- When procedure is out of the specified, the operation returns to normal operation.
- Maximum 4 recognition codes can be registered.