Disassembly and Reassembly

DISASSEMBLY

1. REMOVE A/C SWITCH AND DEFOGGER SWITCH
Using a screwdriver, release the claw and pull out the switch backward.

HINT: Tape the screwdriver tip before use.

2. REMOVE THESE PARTS:
a. Heater control knobs
b. Heater control cable

3. REMOVE BLOWER SPEED CONTROL SWITCH
Remove the 2 screws and pull out the switch.

4. REMOVE MODE SWITCH
Remove the 2 screws and pull out the switch.

5. REMOVE HEATER CONTROL NAME SHEET
a. Remove the 2 screws.
b. Using a screwdriver, release the 4 claws and heater control name sheet.

HINT: Tape the screwdriver tip before use.

REASSEMBLY

Reassembly is in the reverse order of removal.