Transmission Temperature Sensor/Switch: Service and Repair
ON-VEHICLE REPAIR1. REMOVE NO.2 ENGINE UNDER COVER
2. DISCONNECT ATF TEMPERATURE SENSOR CONNECTOR
3. REMOVE ATF TEMPERATURE SENSOR
a) Remove the ATF temperature sensor.
b) Remove the O-ring from the ATF temperature sensor.
4. INSTALL ATF TEMPERATURE SENSOR
a) Coat a new O-ring with ATF and install it to the ATF temperature sensor.
b) Install the ATF temperature sensor.
Torque: 15 Nm (150 kg-cm, 11 ft. lbs.)
5. CONNECT ATF TEMPERATURE SENSOR CONNECTOR
6. INSTALL NO.2 ENGINE UNDER COVER