Power Mirror Control System

1. Left side: INSPECT MIRROR CONTROL SWITCH CONTINUITY







2. Right side: INSPECT MIRROR CONTROL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.

3. INSPECT MIRROR MOTOR




a. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 4, check that the mirror turns to left side.




b. Reverse the polarity, check that the mirror turns to right side.




c. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 4, check that the mirror turns upward.




d. Reverse the polarity, check that the mirror turns downward.
If operation is not as specified, replace the mirror assembly.