Programming an Entrance Gate

1. Decide which of the 3 HomeLink(R) buttons you want to program. (See Step 1 in "First Time Programming.")

2. Place the hand-held gate transmitter 1 to 3 inches away from the surface of the HomeLink(R) Universal Transceiver.

NOTE:
Keep the indicator light on the HomeLink(R) in view while programming.

3. Press and hold the selected HomeLink(R) button.

4. Continuously press and release (cycle) the hand-held gate transmitter button every 2 seconds until Step 5 is complete.

5. When the LED (indicator) light on the HomeLink(R) changes from a slow to a rapid flash, release both buttons.

6. Test the operation of the HomeLink(R) by pressing the newly programmed button. Check to see if the gate operates correctly.