Disassembly and Reassembly

DISASSEMBLY

1. PULL OUT HEATER CONTROL KNOBS

2. REMOVE HEATER CONTROL NAME PLATE
Release the 4 clews and remove the heater control name plate.

3. REMOVE A/C SWITCH
Release the 4 clews and remove the A/C switch from the heater control name plate.

4. REMOVE BLOWER SPEED CONTROL SWITCH
a. Pull out the 2 bulbs.
b. Disconnect the 2 bulb holders.
c. Remove the 2 screws and blower speed control switch.

5. REMOVE HEATER CONTROL CABLES
a. Using a screwdriver, open the claw of the cable clamp and disconnect the outer cable.

HINT: Tape the screwdriver tip before use.

b. Remove the inner cable from the A/C control assembly.

REASSEMBLY

1. INSTALL HEATER CONTROL CABLES
a. Install the inner cable to the A/C control assembly.
b. Connect the outer cable.

2. INSTALL BLOWER SPEED CONTROL SWITCH
a. Install the blower speed control switch with the 2 screws.
b. Connect the 2 bulb holders.
c. Push in the 2 bulbs.

3. INSTALL A/C SWITCH
Install the A/C switch to the heater control name plate.

4. INSTALL HEATER CONTROL NAME PLATE
Install the heater control name plate.
5. PUSH IN HEATER CONTROL KNOBS