Service Specifications

SERVICE SPECIFICATIONS
Body Clearance:
Standard 0.07 - 0.15 mm (0.0028 - 0.0059 inch)
Maximum 0.3 mm (0.012 inch)

Tip Clearance:
Standard 0.11 - 0.14 mm (0.0043 - 0.0055 inch)
Maximum 0.3 mm (0.012 inch)

Side Clearance:
Standard 0.02 - 0.05 mm (0.0008 - 0.0020 inch)
Maximum 0.1 mm (0.004 inch)

Drive And Driven Gear Thickness:
Mark
A 9.440 - 9.456 mm (0.3717 - 0.3723 inch)
B 9.456 - 9.474 mm (3.3723 - 0.3730 inch)
C 9.474 - 9.490 mm (0.3730 - 0.3736 inch)

Pump Body Busing Inside Diameter:
Maximum 38.18 mm (1.5031 inch)

Stator Shaft Busing Inside Diameter
Front Side Maximum 21.57 mm (0.8492 inch)
Rear Side Maximum 27.07 mm (1.0657 inch)