Blower Motor: Testing and Inspection
INSPECTION1. REMOVE GLOVE COMPARTMENT DOOR
2. REMOVE DOOR SCUFF PLATE
3. REMOVE COWL SIDE TRIM
4. REMOVE BLOWER MOTOR
a. Disconnect the blower motor connector.
b. Using a torx wrench, remove the 3 screws and blower motor.
5. INSPECT BLOWER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, then check that the motor operations smoothly.
If operation is not as specified, replace the blower motor.
6. INSTALL BLOWER MOTOR
a. Using a torx wrench, install the blower motor with the 3 screws.
b. Connect the blower motor connector.
7. REINSTALL COWL SIDE TRIM
8. REINSTALL DOOR SCUFF PLATE
9. REINSTALL GLOVE COMPARTMENT DOOR