EGR Control Solenoid: Testing and Inspection

COMPONENTS

INSPECTION

1. 4WD: REMOVE BATTERY
2. REMOVE VSV
3. INSPECT VSV

4. INSPECT VSV FOR OPEN CIRCUIT




Using an ohmmeter, check that there is continuity between the terminals.

Resistance: At 20 °C (68 °F): 33 - 39 Ohms

If there is no continuity, replace the VSV.

5. INSPECT VSV FOR GROUND




Using an ohmmeter, check that there is no continuity between each terminal and the body.

If there is continuity, replace the VSV.

6. INSPECT VSV OPERATION




a. Check that air flows from ports E to G.




b. Apply battery positive voltage across the terminals.
c. Check that air flows from port E to the filter.
If operation is not as specified, replace the VSV.

7. REINSTALL VSV
8. 4WD: REINSTALL BATTERY