Transfer Right Case Retainer

TRANSFER RIGHT CASE RETAINER

COMPONENTS





TRANSFER RIGHT CASE DISASSEMBLY





1. REMOVE OIL SEAL
Using a screwdriver, remove the oil seal.
2. REMOVE SIDE GEAR SHAFT HOLDER





a. Using snap ring pliers, remove the snap ring.



b. Using a plastic hammer, remove the side gear shaft holder.
3. REMOVE HOLDER BEARING





a. Using a snap ring expander, remove the snap ring.





b. Using a press, press out the bearing.





4. REMOVE OIL SEAL
Using a screwdriver, remove the oil seal.

TRANSFER RIGHT CASE RETAINER ASSEMBLY
1. INSTALL HOLDER BEARING





a. Using SST and a press, press in the holder bearing.
SST 09226-10010





b. Using a snap ring expander, install the snap ring.
2. INSTALL SIDE GEAR SHAFT HOLDER





a. Using a plastic hammer, install the side gear shaft holder.





b. Using snap ring pliers, install the snap ring.
3. INSTALL OIL SEAL

Left side oil seal:
a. Coat a new oil seal lip with MP grease.





b. Using SST and a hammer, drive in the oil seal.
SST 09316-60011 (09316-00011, 09316-00041)

Oil seal depth: 0.0 mm (0.0 inch)

Right side oil seal:
a. Coat a new oil seal lip with MP grease.





b. Using SST and a hammer, drive in the oil seal.
SST 09608-32010, 09950-70010 (09951-07150)

Oil seal depth: 0.0 mm (0.0 inch)