Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2000 >> Sienna LE V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Switch: Testing and Inspection




1. REMOVE CENTER CLUSTER FINISH PANEL
Using a screwdriver, release the 4 claws and pull out the panel and disconnect the connectors.

HINT: Tape the screwdriver tip before use.




2. REMOVE REAR BLOWER SWITCH
a. Pull out the switch knob.
b. Remove the 2 screws and switch.




3. INSPECT REAR BLOWER SWITCH CONTINUITY




- Switch continuity:
If continuity is not as specified, replace the switch.
- Illumination circuit:
If continuity is not as specified, check the bulb.




4. INSTALL REAR BLOWER SWITCH
a. Install the switch with the 2 screws.
b. Install the switch knob.

5. INSTALL CENTER CLUSTER FINISH PANEL
Install the panel, then connect the connector.
pro multis · About Operation CHARM