Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Conditioning Amplifier

INSPECTION




1. REMOVE A/C AMPLIFIER
a. Remove the lower finish panel.
b. Disconnect the connector.
c. Release the 2 claws and remove the amplifier.

2. INSPECT AMPLIFIER CIRCUIT







a. Inspect the amplifier connector on wire harness side as shown in the chart.

Test conditions:
- Ignition switch: ON
- Blower speed switch: HI
- Temperature control lever: Max. Cool

If circuit is as specified, try replacing the amplifier with a new one. If the circuit is not as specified, inspect the circuits connected to other parts.







b. Connect the connector to amplifier and inspect wire harness side connector from the back side, as shown in the chart.

Test conditions:
- Running engine: idle speed
- Blower speed switch: HI
- A/C switch: ON
- Temperature control lever: Max Cool
- Set on manifold gauge set

If circuit is as specified, try replacing the amplifier with a new one. If the circuit is not as specified, inspect the circuits connected to other parts.