Inlet Air Temperature Sensor

AIR INLET TEMPERATURE SENSOR (Auto A/C)

INSPECTION

1. REMOVE FRONT SEATS
2. REMOVE FRONT DOOR SCUFF PLATES
3. REMOVE COWL SIDE TRIMS
4. REMOVE REAR DOOR SCUFF PLATES
5. REMOVE LOWER CENTER PILLAR GARNISH




6. REMOVE AIR INLET TEMPERATURE SENSOR
a. Slide the floor carpet backward.
b. Disconnect the connector.
c. Remove the screw and air inlet temperature sensor.

7. INSPECT AIR INLET TEMPERATURE SENSOR CIRCUIT
Refer to diagnostic information provided at Heating and Air Conditioning; Testing and Inspection.


8. INSTALL AIR INLET TEMPERATURE SENSOR CIRCUIT
a. Install the air inlet temperature sensor with screw.
b. Connect the connector.
c. Install floor carpet.

9. INSTALL LOWER CENTER PILLAR GARNISH
10. INSTALL REAR DOOR SCUFF PLATES
11. INSTALL COWL SIDE TRIMS
12. INSTALL FRONT DOOR SCUFF PLATES
13. INSTALL FRONT SEATS