Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2003 >> Avalon V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Testing and Inspection

INSPECTION

1. REMOVE EVAPORATOR TEMPERATURE SENSOR
a. Remove the blower unit.




b. Remove evaporator temperature sensor.
1. Disconnect the connector.
2. Pull out the sensor.

2. INSPECT EVAPORATOR TEMPERATURE SENSOR
Inspect evaporator temperature sensor resistance.




1. Place the sensor in cold water, and while changing the temperature of the water, measure resistance at the connector and at the same time, measure temperature of the water with a thermometer.




2. Compare the 2 readings on the chart.
If resistance value is not as specified, replace the sensor.

3. INSTALL EVAPORATOR TEMPERATURE SENSOR
a. Install the evaporator temperature sensor.
1. Install the sensor.
2. Connect the connector.
b. Install the blower unit.
pro multis · About Operation CHARM