Overhaul

DISASSEMBLY

1. REMOVE SUNSHADE STOPPERS

Torque: 2.0 N.m (20 kgf.cm, 17 in.lbf)

2. REMOVE NO. 1 AND NO. 2 SUNSHADE TRIMS
3. REMOVE FRONT HOUSING FRAME




Remove the 6 screws and front housing frame as shown in the illustration.

Torque: 2.0 N.m (20 kgf.cm, 17 in.lbf)

4. REMOVE REAR ROOF DRIP CANNEL
5. REMOVE LH AND RH ROOF DRIP CHANNEL




6. REMOVE CABLE GUIDE CASING

Torque: 2.0 N.m (20 kgf.cm, 17 in.lbf)

7. REMOVE DRIVE CABLE




a. Remove the screw.
b. Slide the drive cable rearward, then remove it.
c. Employ the same manner described above to the other side.






HINT: At the time of reassembly, please refer to the following items.
- Adjust the drive cable to a closed and tilted down position.
- Slide the cable forward or backward to align the 2 marks as shown in the illustration.

REASSEMBLY
Reassembly is in the reverse order of disassembly.