Oil Pump Assembly Replacement

Part 1 Of 4:

Part 2 Of 4:

Part 3 Of 4:

Part 4 Of 4:

REMOVAL





1. DRAIN ENGINE OIL
2. REMOVE TIMING CHAIN AND CRANKSHAFT TIMING SPROCKET
3. REMOVE OIL PUMP
Remove the 5 bolts, oil pump and gasket.

INSTALLATION





1. INSTALL OIL PUMP
a. Place a new gasket on the cylinder block.
b. Engage the spline teeth of the oil pump drive rotor with the large teeth of the crankshaft, and slide the oil pump.
c. Install the oil pump with the 5 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 inch lbs.)
2. INSTALL CRANKSHAFT TIMING SPROCKET AND TIMING CHAIN
3. FILL ENGINE WITH OIL
4. START ENGINE AND CHECK FOR LEAKS
5. RECHECK ENGINE OIL LEVEL