Ignition Coil: Service and Repair
Ignition Coil:
REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER
2. REMOVE IGNITION COILS (WITH IGNITER) FROM SPARK PLUGS
a. Remove the 2 bolts and disconnect the wire harness protector.
b. Disconnect the 4 ignition coil connectors.
c. Remove the 4 bolts and pull out the 4 ignition coils (with igniter).
Torque: 9.0 N.m (92 kgf.cm, 79 in.lbf)
INSTALLATION
Installation is in the reverse order of removal.