Collision / Non-Collision Inspections

INSPECTION




Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the seatback assembly installed in the vehicle. Check that there are no cuts and cracks of the outside of side airbag assembly.

Vehicle involved in a collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.*




b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
- Check cuts and cracks of the side airbag assembly.
- Check cuts and cracks in wire harness, and chipping in connectors.

CAUTION: Be sure to follow the correct procedure, for removal and installation of the seatback assembly.

Vehicle involved in a collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
a. Do a diagnostic system check.*

b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
- Check the seatback installation part of the seat adjuster.
- Check the damage to the connector and wire harness.

CAUTION: Be sure to follow the correct procedure, for removal and installation of the seatback assembly.

HINT: If the seat adjuster is deformed, never repair it. Always replace it with new one.

* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes. Initial Inspection and Diagnostic Overview