Connecting Rod Bearing
Connecting rod bearing center wall thicknessReference
Mark 1 1.486 - 1.490 mm (0.0585 - 0.0587 inch)
Mark 2 1.490 - 1.494 mm (0.0587 - 0.0588 inch)
Mark 3 1.494 - 1.498 mm (0.0588 - 0.0590 inch)
Bearing cap sub-assembly x Cylinder block
12 pointed head
1st 22 Nm (225 kgf-cm, 16 ft. lbs.)
2nd 44 Nm (449 kgf-cm, 32 ft. lbs.)
3rd Turn 45° Turn 45° Turn 45°
4th Turn 45° Turn 45° Turn 45°
Hexagon head 18.5 Nm (189 kgf-cm, 14 ft. lbs.)
Screw plug x Bearing cap sub-assembly 43 Nm (438 kgf-cm, 32 ft. lbs.)