Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminal Of ECU/Pinouts:
1. INSPECT INTEGRATION RELAY
a. Disconnect the connector from the integration relay.
Terminal Of ECU/Pinouts:
b. Check the continuity between each terminal of the disconnected connector and the body ground, as shown in the illustration and table.
Terminal Of ECU/Pinouts:
c. Reconnect the connector and check the voltage between each terminal and the body ground, as shown in the illustration and table.
Terminal Of ECU/Pinouts:
2. INSPECT INSTRUMENTAL PANEL J/B (INTEGRATION RELAY)
Terminal Of ECU/Pinouts:
a. Disconnect the connectors IA, IB, ID, IF, IH and IJ of the instrument panel J/B.
b. Check the continuity between each terminal of the disconnected connectors and the body ground, as shown in the illustration and table.
Terminal Of ECU/Pinouts:
c. Reconnect the connectors and check the voltage between each terminal and the body ground, as shown in the illustration and table.