Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Testing and Inspection

INSPECTION

1. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY




2. REMOVE THERMISTOR
a. Disconnect the connector.
b. Disconnect the wire harness clamps.
c. Using a screwdriver, pull out the thermistor.




d. Release the 2 claws and remove the thermistor from bracket plate.

3. INSPECT THERMISTOR RESISTANCE




a. Place the thermistor in cold water and while changing the temperature of the water, measure resistance at the connector and at the same time, measure temperature of the water with a thermometer.




b. Compare the 2 readings on the chart.
If resistance value is not as specified, replace the thermistor.

4. INSTALL THERMISTOR
a. Install the thermistor to A/C unit.
b. Connect the wire harness clamps.
c. Connect the connector.

5. INSTALL FRONT PASSENGER AIRBAG