Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2003 >> Highlander 2WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation

REPLACEMENT

1. REMOVE FAN AND GENERATOR V BELT [16361A]
SST 09249-63010




2. REMOVE GENERATOR ASSEMBLY [27020]
a. Disconnect the engine wire as shown in the illustration.
b. Remove 3 bolts and alternator assembly.




3. INSTALL GENERATOR ASSEMBLY [27020]
a. Confirm the wire harness of the crank position sensor is placed as shown in the illustration.
b. Install the alternator assembly.

Torque:
M8 21 N.m (214 kgf.cm, 15 ft.lbf)
M10 52 N.m (530 kgf.cm, 38 ft.lbf)
Wiring harness clamp 8.4 N.m (85 kgf.cm, 74 in.lbf)
Alternator wire 9.8 N.m (100 kgf.cm, 7 ft.lbf)

NOTE: Be careful not to put the wire harness in when install the alternator.

4. INSTALL FAN AND GENERATOR V BELT [16361A]
SST 09249-63010
pro multis · About Operation CHARM