Without Scan Tool

Check the DTC






HINT: If a malfunction occurs in the speed sensor or stop light switch, etc. during cruise control driving, the ECM actuates AUTO CANCEL of the cruise control and turns ON and OFF the CRUISE MAIN indicator light to inform the driver of a malfunction. At the same time, the malfunction is stored in memory as a diagnostic trouble code.

Output DTC using diagnosis check wire.




1. Turn the ignition switch ON.
2. Using SST, connect terminals Tc and CG of DLC3.

SST 09843-18040

3. Read the DTC on the CRUISE MAIN indicator light.






HINT:
- If the DTC is not output, inspect the diagnosis circuit.
- As an example, the blinking patterns for codes; normal 52 are shown in the illustration.