Component Tests and General Diagnostics

INSPECTION





1. INSPECT TIRE
a. Check the tires for wear and proper inflation pressure.





Cold tire inflation pressure

b. Check the tire runout.
Tire runout: 3.0 mm (0.118 inch) or less





2. ROTATE TIRE

HINT:
^ Rotate tires as shown in the illustration.
^ Rotate as shown in (B) if the spare tire is included in the rotation.





3. INSPECT WHEEL BALANCE
a. Check and adjust the Off-the car balance.
b. If necessary, check and adjust the On-the car balance. Imbalance after adjustment: 14.0 g (0.031 lb.) or less
4. CHECK FRONT SUSPENSION FOR LOOSENESS
5. CHECK STEERING LINKAGE FOR LOOSENESS
6. CHECK BALL JOINT FOR LOOSENESS
7. CHECK SHOCK ABSORBER WORKS PROPERLY
^ Check that oil leaks
^ Check the mounting bushings for wear
^ Bounce front and rear of the vehicle