Counter Driven Gear

DISASSEMBLY





1. REMOVE TAPERED ROLLER BEARING (MG1 side)
Using SST and a press, remove the tapered roller bearing.
SST 09527-10011, 09950-00020, 09950-60010 (09951-00360), 09950-70010 (09951-07100)





2. REMOVE TAPERED ROLLER BEARING (MG2 side)
Using SST and a press, remove the tapered roller bearing.
SST 09950-00020, 09950-60010, (09951-00360), 09950-70010 (09951-07100)

INSPECTION
CHECK TAPERED ROLLER BEARING





Check that burnt spots, deformation or play due to the wear is not identified.
If they are identified, replace the tapered roller bearing.

REASSEMBLY





1. INSTALL NEW TAPERED ROLLER BEARING (MG1 side)
Using SST and a press, press in a new tapered roller bearing.
SST 09608-06041





2. INSTALL NEW TAPERED ROLLER BEARING (MG2 side)
Using SST and a press, press in a new tapered roller bearing.
SST 09608-06041, 09950-60010 (09951-00370)