Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2003 >> RAV4 2WD L4-2.0L (1AZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Speed Sensor, Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Speed Sensor, Front






REMOVAL
1. TURN OVER FENDER LINER





2. REMOVE SPEED SENSOR
a. Disconnect the sensor connector from the sensor harness.
b. Remove the sensor connector from the body.
c. Remove the harness clamp from the body.
d. Remove the 4 bolts and sensor.
Torque:
Bolt A: 5.0 Nm (52 kgf-cm, 41 inch lbs.)
Bolt B: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
Bolt C: 18.5 Nm (189 kgf-cm, 14 ft. lbs.)

INSTALLATION
Installation is in the reverse order of removal.

HINT: After installation, check the speed sensor signal.



pro multis · About Operation CHARM