Transmission Speed Sensor: Service and Repair

ON-VEHICLE REPAIR
1. REMOVE INPUT TURBINE SPEED SENSOR





a. Disconnect the input turbine speed sensor connector.
b. Remove the bolt and input turbine speed sensor.





c. Remove the O-ring from the input turbine speed sensor.
2. INSTALL INPUT TURBINE SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the input turbine speed sensor.
b. Install the input turbine speed sensor with the bolt.
Torque: 11.3 Nm (115 kgf-cm, 8 ft. lbs.)
c. Connect the input turbine speed sensor connector.
3. REMOVE COUNTER GEAR SPEED SENSOR





a. Disconnect the counter gear speed sensor connector.
b. Remove the bolt and counter gear speed sensor.





c. Remove the O-ring from the counter gear speed sensor.
4. INSTALL COUNTER GEAR SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the counter gear speed sensor.
b. Install the counter gear speed sensor with the bolt.
Torque: 11.3 Nm (115 kgf-cm, 8 ft. lbs.)
c. Connect the counter gear speed sensor connector.