Rear Seat (Extra Cab)
REMOVAL1. REMOVE BACK PANEL UPPER GARNISH AND REAR SEAT BACK
a. Using a screwdriver, remove the garnish.
HINT: Tape the screwdriver tip before use.
b. Remove the 3 bolts and rear seat back.
2. REMOVE BACK PANEL LOWER GARNISH
Using a screwdriver, remove the garnish.
HINT: Tape the screwdriver tip before use.
3. REMOVE REAR SEAT CUSHIONS
Remove the 4 bolts and rear seat cushions.
4. REMOVE SEAT TURN TABLE
INSTALLATION
1. INSTALL SEAT TURN TABLE
2. INSTALL REAR SEAT CUSHIONS
Install the rear seat cushions with the 4 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
3. INSTALL BACK PANEL LOWER GARNISH
Install the back panel lower garnish to the body.
4. INSTALL BACK PANEL UPPER GARNISH AND REAR SEAT BACK
a. Install the rear seat back with the 3 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
b. Install the garnish to the body.