Active Test

ACTIVE TEST

HINT: Performing ACTIVE TEST using the hand-held tester allows the relay, VSV, actuator and so on to operate without parts removal. Performing ACTIVE TEST as a first step of troubleshooting is one method to shorten diagnostic time.
It is possible to display DATA LIST during ACTIVE TEST.

Part 1:

Part 2:

a. Warm up the engine.
b. Turn the ignition switch to OFF.
c. Connect the hand-held tester to the DLC3.
d. Turn the ignition switch to ON.
e. Turn the hand-held tester ON.
f. Enter the following menus: DIAGNOSIS/ENHANCED OBD II/ACTIVE TEST.
g. According to the display on the tester, perform the ACTIVE TEST.