Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2004 >> 4 Runner 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Traction Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Traction Control Module: Service and Repair

SKID CONTROL ECU ASSY
REPLACEMENT
1. REMOVE INSTRUMENT PANEL FINISH PLATE
2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
3. REMOVE INSTRUMENT PANEL LOWER LH





4. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSY
a. Remove the bolt and 2 nuts, then move the instrument panel junction block assy aside.





5. REMOVE SKID CONTROL ECU ASSY
a. Disconnect the 4 skid control ECU connectors.
b. Remove the 2 nuts and control ECU assy.
c. Disconnect the skid control buzzer connector and remove the skid control buzzer assy from skid control ECU assy.





6. INSTALL SKID CONTROL ECU ASSY
a. Install the skid control buzzer on the skid control ECU, and connect the skid control buzzer connector.
b. Install the skid control ECU assy with 2 nuts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
c. Connect the 4 skid control ECU connectors.





7. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSY
a. Install the instrument panel junction block assy with bolt and 2 nuts.
8. INSTALL INSTRUMENT PANEL LOWER LH
9. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
10. INSTALL INSTRUMENT PANEL FINISH PLATE
11. CHECK VSC SENSOR SIGNAL
pro multis · About Operation CHARM