Control Assembly: Service and Repair
Integration Control & Panel AssyOVERHAUL
HINT:
COMPONENTS:
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER
2. REMOVE INTEGRATION CONTROL & PANEL ASSY
3. REMOVE RADIO RECEIVER ASSY
4. REMOVE CONTROL KNOB SUB-ASSY
5. REMOVE HEATER CONTROL NAME SHEET NO.1 (MANUAL AIR CONDITIONER)
6. REMOVE HEATER CONTROL NAME SHEET NO.2
a. Using a screwdriver with protected by taping, remove the heater control name sheet No.2.
7. REMOVE HEATER CONTROL RETAINER
a. Release the lock of connector and disconnect the cable.
b. Remove the 8 screws and heater control housing.
8. REMOVE AIRCONDITIONER AMPLIFIER ASSY
a. Remove the 3 screws and air conditioner amplifier assy from the heater control housing.
9. REMOVE INTEGRATION CONTROL & PANEL BULB
10. REMOVE HEATER BLOWER SWITCH (MANUAL AIR CONDITIONER)
11. REMOVE HEATER CONTROL HOUSING SUB-ASSY
12. INSTALL INTEGRATION CONTROL & PANEL BULB
a. Install the integration control & panel bulb to the heater control housing.
Bulb position:
13. INSTALL HEATER CONTROL NAME SHEET NO.2