Component Tests and General Diagnostics

CIRCUIT DESCRIPTION

When the ignition switch is turned ON, the battery positive voltage is applied to the coil which closes the contacts of the EFI relay (Marked: EFI) and supplies power to terminal +B of the ECM.

This signal causes current to flow to the coil, closing the contacts of the EFI relay and supplying power to terminal +B of the ECM.

If the ignition switch is turned off, the ECM continues to switch on the EFI relay for a maximum of 2 seconds for the initial setting of the ISC valve.

Wiring Diagram:

Step 1 - 3:

Step 4 - 5:

Step 6:

INSPECTION PROCEDURE