Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2004 >> Prius L4-1.5L (1NZ-FXE) Hybrid >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair >> Brake Control Power Supply Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Control Power Supply Assembly

BRAKE CONTROL POWER SUPPLY ASSY
REPLACEMENT
1. REMOVE REAR SEAT CUSHION ASSY
2. REMOVE DECK TRIM SIDE PANEL ASSY RH

HINT: Refer to the procedures from the removal of the rear door scuff plate RH up until the removal of the deck trim side panel assy RH.

3. REMOVE BRAKE CONTROL POWER SUPPLY ASSY





a) Disconnect the connector and remove the 3 bolts and the brake control power supply assy.
4. INSTALL BRAKE CONTROL POWER SUPPLY ASSY





a) Install the brake control power supply assy with the 3 bolts.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
b) Connect the connector to the brake control power supply assy.
5. INSTALL DECK TRIM SIDE PANEL ASSY RH
6. INSTALL REAR SEAT CUSHION ASSY
7. CHECK AND CLEAR DTC

pro multis · About Operation CHARM