Transmission Speed Sensor: Service and Repair

TRANSMISSION REVOLUTION SENSOR (U151E/U151F)
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER INLET NO.2
5. REMOVE AIR CLEANER BRACKET
6. REMOVE AIR CLEANER INLET NO.1





7. REMOVE TRANSMISSION REVOLUTION SENSOR (NT SENSOR)
a. Disconnect the transmission revolution sensor connector.
b. Remove the bolt and transmission revolution sensor.





8. REMOVE TRANSMISSION REVOLUTION SENSOR (NC SENSOR)
a. Disconnect the transmission revolution sensor connector.
b. Remove the bolt and transmission revolution sensor.





9. INSTALL TRANSMISSION REVOLUTION SENSOR (NC SENSOR)
a. Coat an O-ring with ATF.
b. Install the transmission revolution sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)

HINT: Make sure of the manufacturer's name.

c. Connect the transmission revolution sensor connector.





10. INSTALL TRANSMISSION REVOLUTION SENSOR (NT SENSOR)
a. Coat an O-ring with ATF.
b. Install the transmission revolution sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)

HINT: Make sure of the manufacturer's name.

c. Connect the transmission revolution sensor connector.
11. INSTALL AIR CLEANER INLET NO.1
12. INSTALL AIR CLEANER BRACKET
13. INSTALL AIR CLEANER INLET NO.2
14. INSTALL AIR CLEANER HOSE NO.1
15. INSTALL AIR CLEANER ASSY
16. INSTALL BATTERY
17. CHECK ABS SPEED SENSOR SIGNAL
a. ABS WITH EBD SYSTEM
b. ABS WITH EBD & BA & TRAC VSC & SYSTEM