Power Point Socket Assy

Audio And Visual System:

POWER POINT SOCKET ASSEMBLY

REPLACEMENT

1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (M/T TRANSAXLE)
3. REMOVE CONSOLE PANEL UPPER
4. REMOVE CONSOLE BOX CARPET
5. REMOVE CONSOLE BOX SUB-ASSEMBLY REAR (M/T TRANSAXLE)
6. REMOVE CONSOLE BOX SUB-ASSEMBLY REAR (A/T TRANSAXLE)

7. REMOVE POWER POINT SOCKET ASSEMBLY
a. Turn the socket in the circumference direction as shown the illustration, disengage the claw between the socket and the power outlet socket cover RR, and push out the socket to the room side.
b. Align the socket with the notch on the power outlet socket cover RR, remove the power point socket assembly RR to the room side.

8. INSTALL POWER POINT SOCKET ASSEMBLY
a. Align the socket with the notch on the power outlet socket cover RR, push the power point socket assembly RR into as hard as possible and install it.