Manual Shifting Test

MANUAL SHIFTING TEST






HINT:
- With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transaxle.
- If any abnormalities are found in the following test, the problem is in the transaxle itself.

a. Disconnect connector of transmission wire.




b. Drive with the transmission wire disconnected.
Shifting the shift lever in the order of L, 2, 3, 4 and D to check whether the shifting condition changes the table.

HINT: When driving with the transmission wire disconnected, the shift lever position is in L or 2, the gear position is held in 3rd and the shift lever position is in 3, 4 or D, the gear position is held in 4th. However, when the shift position is in R or P, the operation is same as usual.

c. Connect connector of transmission wire.
d. Clear the DTC.