Connecting Rod, Engine
Connecting rodSpecified thrust clearance 0.15 to 0.35 mm (0.0059 to 0.0138 inch)
Connecting rod thickness 20.80 to 20.85 mm (0.8189 to 0.8209 inch)
Specified connecting rod oil clearance 0.038 to 0.080 mm (0.0015 to 0.0031 inch)
Maximum misalignment per 100 mm (3.94 inch) 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
Maximum rod twist per 100 mm (3.94 inch) 0.15 mm (0.0059 inch) per 100 mm (3.94 inch)
Bush inside diameter 22.005 to 22.014 mm (0.8663 to 0.8667 inch)
Connecting rod bolt
Specified diameter 7.2 to 7.6 mm (0.283 to 0.299 inch)
Connecting rod cap x Connecting rod
1st 25 Nm (250 kgf-cm, 18 ft. lbs.)
2nd Turn 90°