Compressor Clutch: Specifications
INSPECT MAGNETIC CLUTCH CLEARANCE
a. Set the dial indicator to the magnet clutch hub.
b. Connect the battery positive lead to the terminal 1 of magnet clutch connector and the negative lead to the earth wire. Turn on and off the magnet clutch and measure the clearance.
Standard clearance: 0.35-0.60 mm (0.013-0.023 in.)
If the measured value is outside the standard range, remove the magnet clutch hub and adjust it with the magnet clutch washers.
NOTE: Adjustment shall be performed with 3 or less magnet clutch washers.