Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2006 >> Highlander 2WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Service and Repair

Cruise Control Main Switch:






REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE STEERING WHEEL NO.3 COVER LOWER
3. REMOVE STEERING WHEEL NO.2 COVER LOWER
4. REMOVE HORN BUTTON ASSEMBLY




5. REMOVE CRUISE CONTROL MAIN SWITCH
a. Disconnect the connector.
b. Remove the 2 screws.




c. Pull the cruise control main switch in the arrow direction to remove it.

INSTALLATION




1. INSTALL CRUISE CONTROL MAIN SWITCH
a. Install the cruise control main switch with the 2 screws.

Torque: 2.4 N.m (25 kgf.cm, 21 in.lbf)

b. Connect the connector.

2. INSTALL HORN BUTTON ASSEMBLY
3. INSTALL STEERING WHEEL NO.3 COVER LOWER
4. INSTALL STEERING WHEEL NO.2 COVER LOWER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT HORN BUTTON ASSEMBLY
7. INSPECT SRS WARNING LIGHT
pro multis · About Operation CHARM