Crankshaft Main Bearing

Crankshaft
Main Journal Diameter 54.988 to 55.000 mm (2.16488 to 2.16535 inch)
Maximum Taper & Out-of-Round 0.003 mm (0.0001 inch)
Maximum Circle Runout 0.03 mm (0.0012 inch)
Thrust Clearance
Standard 0.040 to 0.240 mm (0.0016 to 0.0094 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust Washer Thickness 1.930 to 1.980 mm (0.0760 to 0.0780 inch)
Oil Clearance
Standard 0.024 to 0.048 mm (0.00094 to 0.00189 inch)

Reference:

Main Bearing Size Codes





Main Bearing Cap Bolts
First Pass 40 Nm (408 kgf-cm, 30 ft. lbs.)
Final Pass 90°

Crankshaft Pulley Bolt 180 Nm (1,835 kgf-cm, 133 ft. lbs.)