Engine: Specifications

Cylinder Head Bolts





Minimum outside diameter 10.70 mm (0.4213 inch)
If the diameter is less than the minimum, replace the cylinder head bolt.








First pass 36 Nm (367 kgf-cm, 27 ft. lbs.) in several steps
Second pass Tighten 90°
Third pass Tighten 90°





Final pass: Bolts 1 & 2 30 Nm (306 kgf-cm, 22 ft. lbs.)

Intake manifold bolts & nuts 21 Nm (214 kgf-cm, 15 ft. lbs.) in several passes

Camshaft Bearing Cap Bolts








First pass 10 Nm (102 kgf-cm, 7 ft. lbs.)








Second pass 28 Nm (286 kgf-cm, 21 ft. lbs.)








Final pass 16 Nm (163 kgf-cm, 12 ft. lbs.)

Crankshaft Main Bearing Cap Bolts





Lower bolts
First pass 61 Nm (622 kgf-cm, 45 ft. lbs.)
Final pass Tighten 90°





Side bolts
Bolt length:
Bolt A 45 mm (1.77 inch)
Except Bolt A 30 mm (1.18 inch)
Torque 52 Nm (530 kgf-cm, 38 ft. lbs.)

Connecting Rod Cap Bolts





Diameter
Standard 7.2 to 7.3 mm (0.283 to 0.287 inch)
Maximum 7.0 mm (0.276 inch)
Torque
First pass 25 Nm (255 kgf-cm, 18 ft. lbs.)
Final pass Tighten 90°

Crankshaft pulley bolt 250 Nm (2,549 kgf-cm, 184 ft. lbs.)

Flex Plate Bolts





Do not reuse the bolts.

Torque 178 Nm (1,815 kgf-cm, 132 ft. lbs.)

Oil Pump Bolts





Bolt length:
Bolt A 22 mm (0.87 inch)
Bolt B 40 mm (1.58 inch)

Torque 9.0 Nm (92 kgf-cm, 80 inch lbs.)

Exhaust manifold nuts 21 Nm (214 kgf-cm, 15 ft. lbs.)

Water Pump Bolts





Be sure to replace the 2 C bolts with new ones or reuse them after applying adhesive.

Bolt A 21 Nm (214 kgf-cm, 15 ft. lbs.)
Bolts B & C 9.1 Nm (93 kgf-cm, 81 inch lbs.)