Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2006 >> RAV4 4WD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Diagrams >> Connector Views >> Electronic Brake Control Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module

TERMINALS OF ECU

Terminals Of Control Module/Pinouts:




1. SKID CONTROL ECU

2. CHECK SKID CONTROL ECU




a. Disconnect the A19 ECU connector.




b. Measure the voltage and resitance of the wire harness side connector.

HINT: The voltage cannot be measured with the connector connected to the skid control ECU as the connector is water resistant.

If the result is not as specified, there may be a malfunction on the wire harness side.




3. CHECK INSTRUMENT PANEL JUNCTION BLOCK (MAIN BODY ECU)

a. Disconnect the ID junction block connector.




b. Measure the resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.

c. Reconnect the ID junction block connector.




d. Measure the voltage of the wire harness side connector.
If the result is not as specified, the junction block (ECU) may be a malfunction.
pro multis · About Operation CHARM