Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2006 >> RAV4 4WD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.




2. REMOVE ACCELERATOR PEDAL ROD
a. Disconnect the accelerator pedal position sensor connector.
b. Remove the 2 bolts and accelerator pedal rod.

INSTALLATION




1. INSTALL ACCELERATOR PEDAL ROD
a. Install the accelerator pedal rod with the 2 bolts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.*lbf)

b. Connect the accelerator pedal position sensor connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
pro multis · About Operation CHARM