Service Data

CRANK SHAFT BEARING





Install crank shaft bearing.

HINT: Main bearings come in widths of 22.4 mm (0.882 inch) and 19.0 mm (0.748 inch). Install the 22.4 mm (0.882 inch) bearings in the No. 1 and No. 4 cylinder block journal positions with the main bearing cap. Install the 19.0 mm (0.748 inch) bearings in the No. 2 and No. 3 positions.

PISTON
Piston diameter 91.953 to 91.967 mm (3.6202 to 3.6207 inch)
Standard oil clearance 0.033 to 0.059 mm (0.0013 to 0.0023 inch)
Maximum oil clearance 0.13 mm (0.0051 inch)

PISTON RING
Standard end gap:
No. 1 0.30 to 0.40 mm (0.0118 to 0.0157 inch)
No. 2 0.50 to 0.60 mm (0.0197 to 0.0236 inch)
Oil (Side rail) 0.15 to 0.40 mm (0.0059 to 0.0157 inch)
Maximum end gap:
No. 1 0.95 mm (0.0374 inch)
No. 2 1.05 mm (0.0413 inch)
Oil (Side rail) 1.00 mm (0.0394 inch)